If-10C Interface Kit Installation - Kenwood TS-140S Instruction Manual

7-3. IF-10C INTERFACE KIT INSTALLATION
1.Remove the bottom cover of the transceiver.
Please refer to Section 6-6-1.
2. Install the IF-10C in the upper left of the control
unit with the 4 screws provided with the IF-10C.
Ensure the unit is properly positioned as shown in
the diagram.
+
Baca CN9 CNS
i eS
af
36
. Reinstall the bottom cover.
Note:
Do not pinch any cable harnesses when reas-
sembling.