Speco DVR-4TN Manual page 100

User's Manual
5.8.3.1
5.8.3.2
5.8.3.3
5.9
100
Copy Destination
Select this item to list available destinations (external memory devices) to
which the configuration can be exported. Press UP / DOWN to set a
destination. Please note that saving a different configuration to the same copy
destination with the same file name will overwrite the previous configuration
file without warning.
NOTE: Users are not allowed to select any CD-R/W or DVD+RW as a
copy destination, including built-in CD-R/W and DVD+RW.
Configuration Name
This item allows the user to assign the exported configuration file a name. Use
the virtual keyboard to enter the configuration file name.
Note that the file name can contain up to 15 characters, with no spaces.
Begin Export
Select <YES> to begin exporting the configuration file, or <NO> to abort the
export.
NOTE: We strongly recommend users to export configurations before
upgrading your system, and back it up routinely, just in case an
unexpected situation occurs.
Video Export
The Video Export menu enables the administrator to export recorded video
with a digital signature to a USB Thumb drive, a CD-RW or to DVD+RW drive.
Make sure an external storage device is available and connected to the
appropriate port for video export. The Administrator's password is required to
export video.
If the «Pre-Alarm Recording» function is enabled, the event video will be
exported into two files, including pre-alarm video and video recorded after the
alarm is triggered.
DVR-4TN/8TN/16TN716TS/16TT Series
SPECO TECHNOLOGIES 05/07