Speco DVR-4TN Manual page 66

User's Manual
5.1.6.3
66
Dial-in Setup
The Dial-in function enables the user to establish dial-up modem
communication to and from the DVR-4TN/8TN/16TN/416TS/16TT series unit
for remote software use. The user is allowed to connect only one modem to a
DVR-4TN/8TN/A6TN/16TS/16TT series unit.
For more information on dial-up setting on PC, see Appendix D: Dial-up
Connections via Modem.
NOTE: The Dial-in Service is not available if there is no modem
connected to the unit.
In Network Setup menu, select «Dial-in Setup» and press ENTER fo enter the
Dial-in menu. The menu displays as follows.
Dial-in Setup
1. Dial-in Service OFF
2. Dial-in Account User
3. Dial-in Password XXXX
4. Server IP 192. 168. 0. 1
5. Client IP 192. 168. 0. 2
6. Dia-in Idle Time 0 Min
7. Dial-in Max Time 0 Min
Dial-in Service
If the DVR-ATN/8TN/A6TN/16TS/16TT series unit does not connect to the
Internet, the user can communicate to the unit from a remote PC through a
modem as well. Select «ON» to enable the Dial-in function, or «OFF» to
disable.
Dial-in Account
This item enables user to protect access to the unit by establishing or
changing a dial-in user name for modem connection.
To setup the Diai-in Account, follow these steps.
e Select <Dial-in Account» from Dial-in Setup menu and press ENTER. A
virtual keyboard displays.
DVR-ATN/8TN/TGTN/AGTS/A16TT Series
SPECO TECHNOLOGIES 05/07