Speco DVR-4TN Manual page 59

User's Manual
Network Setup
1. LAN Select
LAN
2. LAN Setup
3. DialHin Setup
4. Dial-out Setup
5. Trigger Port
6. Emall Address 100
7. SMTP Setup
8. DDNS Setup
Items in this menu are described in the following sections.
5.1.6.1 LAN Select
PPPoE
stands
for Point-to-Point
Protocol
over Ethernet,
which
is a
specification for connecting the users by Ethernet to the Internet through a
common broadband medium.
This item allows you to select your service type between «LAN», <PPPoE> or
«None»; if you are using an intranet for communication, please select «LAN»,
if you are using a broadband medium, such as DSL Line or cable modem,
please select <PPPoE>.
If «None» is selected, then there is no need to set further LAN setting,
therefore, the second item «LAN Setup? will not be accessible.
5.1.6.2 LAN Setup
The network related settings In the LAN Setup menu should be associated
with the network service type. If you select «LAN» for «LAN Select», then e^
to 8" item will not be available.
Select <LAN Setup> in Network Setup menu and press ENTER for setting the
parameters; the menu displays as follows.
LAN Setup
1. DHCP OFF
2.IP
192.168.1.150
3. Netmask
255.255.255.0
4. Gateway 192.168.1.1
5. DNS 0.0.0.0
6. PPPoE Account
7. PPPoE Password
8. PPPoE Max Idle 35min
9. Router Setting
10. Connect At Booting YES
11. Network Restart NO
DVR-ATN/BTNLGTN/ 16TS/6TT Series
59
SPECO TECHNOLOGIES 05/07