Speco DVR-4TN Manual page 69

User's Manual
In the Network Setup menu, select «Dial-out Setup» and press ENTER to
enter the Dial-out menu. The menu displays as follows.
Dial-out Setup
. Dial-out DHCP
. Dial-out IP
. Dial-out Netmask
Diat-out Gateway
. Dial-out DNS
. Phone Number
. Dial-out Account
. Dial-out Password 3
. Dial-out Idle Time 0 Min
. Dial-out Max Time 0 Min
. Connect No
s999
oocoo
29990
Q
2999
ooocomn
É2oOo0coxoo02sowv- ao
- Dial-out DHCP
This item allows the user to obtain a dynamic IP address from a DHCP
(Dynamic Host Configuration Protocol) server over a modem connection. If
the item is enabled (ON) a dynamic IP will be assigned to the
DVR-A4TN/8TN/AGTN/16TS/16TT series unit. In this case, the user does not
need to configure a static IP and the following settings will be "read only."
Select «ON» to enable the DHCP function, or «OFF? to set the dial-out IP
address, Netmask, Gateway and DNS manually. The default setting is «ON».
E Dial-out IP
This item is for setting a static IP address that identifies the DVR-4TN/
DVR-8TN/ DVR-16TN series unit over a modem connection. Set the «Dial-out
DHCP> to «OFF? for accessing this item.
Move the cursor over «Dial-out IP» and press ENTER, then press UP /
DOWN keys to change the values In the selected field.
- Dial-out Netmask
This item is for setting the Netmask that identifies the
DVR-4TN/8TN/AAGTNAGTS/A6TT series unit over a modem connection. To
configure the item, DHCP must be set to «OFF».