Speco DVR-4TN Manual page 67

User's Manual
Diak-in Account
A B f K M
NO QRSTUVWXYZ
a cde fg h i j k | m
n o qr st vVWwXyz
01 3456789. ! Q
dc
<4 b» Backspace Delete
Cancel OK
e Use Direction keys to move the cursor to the desired character.
e Press ENTER to add the selected character to the username entry field.
e When done, move the cursor to «OK» and press ENTER to save the
settings and exit.
NOTE: The Server IP and the Client IP must not be identified as the
same IP address; but they have to be set in the same domain.
For example: Server IP: 192.168.0.1
Client IP: 192.168.0.2
- Dial-in Password
This item allows the user to setup the Dial-in password. Follow these steps to
setup the login password.
e Select <Dial-in password» from Dial-in Setup menu and press ENTER. A
virtual keyboard displays.
e Use Direction keys to select character.
« Press ENTER to add the selected character to the password entry field.
« When done, move the cursor to «OK» and press ENTER to save the
settings and exit.
- Server IP
This item is for setting the IP address that identifies the
DVR-A4TN/8TN/16TN/46TS/46TT series unit over a modem connection. To set
the server IP, follow these steps:
* Select «Server IP».
* Using LEFT/ RIGHT to move the cursor over the IP, and stop where you
want to make the change.