Speco DVR-4TN Manual page 84

User's Manual
5.3.11
5.4
5.4.1
84
Audio Association
This item is used to establish the connection between the selected camera
and the two audio-in channels. Move the cursor to <Audio Association> in the
Camera Setup menu and press ENTER, then select <Both>, <Left Only>,
<Right Only> or <None> by UP / DOWN keys to set up the connection.
Record Setup
The following three factors will effect the total record time of the
DVR-4TN/8TN/16TN/16TS/16TT series unit:
* HDD capacity
e Recording rate (Picture per Second)
* Image quality settings
The greater the recording rate and the higher the quality setting, the shorter
the recording time. Most of the related factors can be set here in this submenu.
The Record Setup menu allows user to set recording quality, recording
schedules, and other recording parameters. Administrator's password is
required to access Record Setup menu. In the Main menu, move the cursor to
<Record Setup> and press ENTER. The following menu is displayed.
Record Setup
1. Record Mode 720x240@60PPS
2. Schedule Setup
3. Preset Config Standard
4. Per Camera Config
5. ezRecord Setup
6. Data Lifetime 0 Days
7. Pre-Alarm Recording 15 Sec
8. Circular Recording ON
9. Audio Recording ON
10. Purge Data
Record Mode
This item is for you to preset the resolution and recording rate of normal
record and event record. The relative record settings, such as uration, will
follow the record mode setting. The offered options are <720x480@30PPS>,
<720 x 240@60PPS> and <360 x 240@120PPS> in NTSC (<720 x
576@25PPS>, <720x288@50PPS>, <360x288@100PPS>in PAL).
DVR-4TN/8TN/18TN/A6TSHA6TT Series
SPECO TECHNOLOGIES 05/07