Speco DVR-4TN Manual page 75

User's Manual
5.1.6.8 DDNS Setup
Dynamic Domain Name System (DDNS) allows a DNS name to be constantly
synchronized with a dynamic IP address. In other words, it allows those using
a dynamic IP address to be associated with a static domain name so others
can connect to it by name.
Once the setting is completed, the DDNS address will be:
http;//yourhostname.ddns.iview-ddns.com
Fore example, if the chosen Host name is "SPECO", then the address will be:
http://speco.ddns.iview-ddns.com
Select «DDNS
Setup» from Network Setup and press ENTER. The menu
displays as below figure.
DDNS Setup
1. Enable DDNS ON
2.. Host Name
XXXX, XXXXXX
3. DDNS Port 80
4. Submit/Update No
5. ezDDNS No
- Enable DDNS
This item is used to enable or disable the Dynamic Domain Name Service.
Select «YES» to enable the service, or «NO» to disable,
- Host Name
This item allows the user to setup a domain name, which is used when
entering the DVR-4TN/STN/16TN/M6TS/16TT series unit through the Internet
on your remote PC.
To setup the Host Name of the unit, follow the steps.
e
Select «Host Name» from DDNS Setup menu and press ENTER. A virtual
keyboard displays as shown.
DVR-TN/8TNAGTN/ 16TS/6TT Series
75
SPECO TECHNOLOGIES 05/07