Speco DVR-4TN Manual page 77

User's Manual
ezDDNS S ate okl
Host name C XXXXXX
Press any key to return
5.1.7 RS485 Setup
This menu allows the user to setup the parameters of the unit's RS-485
communications port. From the Main menu, select <RS485 Setup> and press
ENTER. The following menu is displayed.
RS485 Setup
1. Unit ID
224
2. Baud Rate
9600
3. Bits
8
4. Stop
4
5. Parity
None
5.1.7.1 Unit ID
This item is used to change the RS-485 ID address of the unit. The ID is with
the range of «1» to «255». The default is <224>.
5.1.7.2 Baud Rate
The Baud rate options for association with the protocol are <2400>, <4800>,
«9600», <19200>, «38400» and «57600». The default is «9600» baud.
5.1.7.3 Bits
The user can specify the bits in a word that are associated with this protocol.
The available options are <6>, <7> and <8> bits. The default is <8> bits.
5.1.7.4 Stop
The user can specify the stop bit associated with this protocol. Options are
«1» and «2» stop bits. The default is <1> stop bit.
DVR-TNIBTNATGTN/ 16TS/6TT Series
77
SPECO TECHNOLOGIES 05/07