Table of Contents
Advertisement
5.3
Storage
Injuries
Danger of serious injuries caused by falling objects.
NOTICE
Failure of the exterior protection
Mechanical damage, chemical damage and thermal damage, such as scratches, acids, alkalis,
sparks, welding beads and heat cause corrosion.
Do not damage the paint finish.
Note
Danger of damage to the motor when stacked
Do not stack gearboxes or geared motors on top of each other.
Unless contractually agreed otherwise, the warranty period for the standard preservative
lasts 6 months from the date of delivery.
In the case of storage in transit over 6 months, special arrangements must be made for
preservation. Contact the Technical Support.
Store the gearbox or geared motor in dry, dust-free rooms that are maintained at a constant
temperature.
The storage location must be vibration- and shock-free.
The free shaft ends, sealing elements and flange surfaces must have a protective coating.
Do not store the geared motor on the fan cover.
Storage up to 36 months (optional)
Store the gearbox or geared motor in dry, dust-free rooms that are maintained at a constant
temperature. Special packing is then not necessary.
If rooms such as these are not available, pack the gearbox or the geared motor in plastic
film or air-tight sealed film and materials. The films and materials must be able to absorb
moisture. Cover them to provide protection against heat, direct sunlight and rain.
The permissible ambient temperature is -25 °C to +50 °C.
The life of the corrosion protection is 36 months from delivery.
Motors for mounting onto SIMOGEAR gearboxes
Operating Instructions, 01/2024, A5E53220841A/RS-AA
WARNING
Incoming goods, transport, and storage
5.3 Storage
65
Advertisement
Table of Contents
