Siemens SIMOGEAR BA 2330 Operating Instructions Manual page 88

Commissioning
7.2 Commissioning the motor
• Check that the electrical connections are securely fastened.
• Check all the touch protection measures for both moving and live parts.
• Check that the monitoring instruments are connected and set correctly.
• Check the coolant temperature.
• Check any supplementary equipment being used.
• Check that air intake openings and cooling surfaces are clean.
• Check the clearances between the geared motor and adjacent components; more detailed
information is provided in Chapter Installation conditions for the motor (Page 68).
• Establish a suitable ground connection and equipotential bonding connection.
• Properly mount and fix the motor.
• Check that the ventilation is not impeded and that the discharged air – including that from
adjacent units – cannot be drawn back in.
• Check the belt tension if a belt drive is being used.
• Close and seal the terminal box cover and seal the cable entries.
Commissioning the converter world motor
• For the automated commissioning of the converter world motor, carefully observe the
instructions of the particular converter.
86
Motors for mounting onto SIMOGEAR gearboxes
Operating Instructions, 01/2024, A5E53220841A/RS-AA