What Is New In Ba_2330_0722; Standard Scope; Websites Of Third-Party Companies - Siemens SIMOGEAR BA 2330 Operating Instructions Manual

1.2.4

What is new in BA_2330_0722?

Main changes in this edition
Supplements
• Chapter Brakes newly added -> Brakes (Page 33)
• Chapter Encoder newly added -> Encoder (Page 45)
Changes
• Address changed from Siemens AG to Innomotics GmbH
• Front covers U1 and U4 adapted
• Chapter rating plate data adapted -> Rating plate data (Page 106)
1.2.5

Standard scope

Description
This documentation describes the functionality of the standard scope. This scope may differ
from the scope of the functionality of the system that is actually supplied. The functions of the
system delivered can only be found in the order documents.
Additional functions may be able to be executed in the system, which are not explained
in this documentation. However, these functions cannot be claimed in the case of a new
delivery or service.
This documentation does not contain all detailed information on all product types.
Furthermore, this documentation cannot take into consideration every conceivable type of
installation, operation and service/maintenance.
The machine manufacturer must document any additions or modifications made to the
product.
1.2.6

Websites of third-party companies

Description
This document may contain hyperlinks to third-party websites. Siemens is not responsible for
and shall not be liable for these websites and their content. Siemens does not check the
information that appears on these websites and is not responsible for the content and
information provided there. The user bears the full risk when visiting these websites.
Motors for mounting onto SIMOGEAR gearboxes
Operating Instructions, 01/2024, A5E53220841A/RS-AA
Introduction
1.2 About this manual
9