Transport And Storage; Safety Instructions For Transport - Siemens 1FP1/3 Operating Instructions Manual

Preparing for use
4.5 Transport and storage
Archive the safety and commissioning notes provided in the scope of delivery as well as
the optionally available operating instructions so that these documents are always easily
accessible.
The rating plate optionally enclosed as a loose item with the delivery is provided to enable
the motor data to be attached on or near the machine or installation.
4.5

Transport and storage

4.5.1

Safety instructions for transport

Comply with the following when carrying out any work on the machine:
• Comply with the general safety instructions (Page 15).
• Comply with the applicable national and sector-specific regulations.
• When using the motor within the European Union, comply with the specifications laid down
in EN 50110‑1 regarding safe operation of electrical equipment.
4.5.1.1 Safety instructions for transport
The information required to correctly attach, lift and transport the machine - such as weight,
center of gravity and attachment points - is provided here:
• Machine dimension drawing and the associated explanations or the technical specifications
• Transport data
• Rating plate and lifting plate, if available
• Shipping parts list
• Packaging
Danger when incorrectly lifting and transporting
Danger of death, serious injury, or substantial material damage caused by tipping or falling
transported goods. Comply with the following safety instructions:
• All work must be performed with due caution and care.
• Comply with any notes in the shipping papers.
• Carefully comply with all of the handling information and markings on the packages
whenever transporting and putting the equipment into storage according to ISO 780.
• Only use suitable and correctly dimensioned lifting equipment, conveying equipment and
transport vehicles.
32
1LE1, 1FP1/3, 1PC1/3 shaft height 63 ... 315
Operating Instructions, 11/2023, A5E38483075A