Specific Safety Instructions; General Overview - Siemens SIMOGEAR BA 2330 Operating Instructions Manual

Specific safety instructions

3.1

General overview

Note
Siemens does not accept any liability for damage and operational disturbances that result from
the non-observance of these operating instructions.
Note
EU RoHS Directive and UK Directive
The SIMOGEAR series of geared motors comply with the stipulations laid down in Directive
2011/65/EU and the UK Directive "The Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Regulations 2012".
These operating instructions are included with the geared motors or motor, or you can
find them in SIOS (https://support.industry.siemens.com/cs/ww/en/ps/13424/man). Read the
operating instructions before handling the motor. Comply with the instructions. This is the
best way of ensuring safe and disturbance-free operation.
These operating instructions apply to motors for mounting onto the series of
SIMOGEAR gearboxes.
Note
In addition to these operating instructions, special contractual agreements and technical
documentation apply to a special motor design and the associated supplementary equipment.
When using additional components, carefully observe the notes in the associated
documentation.
Refer to the other operating instructions and safety instructions supplied with the product.
Valid operating instructions for SIMOGEAR
can be found in SIOS (https://support.industry.siemens.com/cs/ww/en/ps/13424/man)
• BA 2030 - operating instructions for SIMOGEAR gearboxes
• BA 2031 - operating instructions for permissible mounting position deviations of SIMOGEAR
gearboxes
• BA 2039 - operating instructions for adapters for mounting on SIMOGEAR gearboxes
• BA 2330 - operating instructions for motors for mounting onto SIMOGEAR gearboxes
• BA 2331 - operating instructions for geared motors with DRIVE-CLiQ safety-related encoder
for safety-related applications
• BA 2332 - operating instructions for geared motors with holding brake for safety-related
applications
Motors for mounting onto SIMOGEAR gearboxes
Operating Instructions, 01/2024, A5E53220841A/RS-AA
3
25