Table of Contents
Advertisement
Control Panel
The following describes the names and functions of components on the control panel.
No.
Component
1
Brightness dial
2
Touch screen
3
<Online> indicator
4
<Job in Memory> indicator
5
<Job Status>
button
6
<Review> button
7
<Machine Status> button
8
<Log In/Out>
button
9
<Power Saver> button
10
Power switch
11
<Clear All> button
1
2
Adjusts the brightness of the touch screen. Use this dial to adjust the
brightness of touch screen when it is too dark to read.
This touch screen displays messages required for operation and buttons
for various features. You can directly touch the touch screen to instruct
operations in screens and set features.
This indicator lights when the machine is sending or receiving data to or
from a client.
This indicator lights when data is stored in the machine's memory.
Pressing this button allows you to confirm or cancel currently executing
or completed jobs, or to confirm or print saved documents.
In text descriptions, this button is indicated as the <Job Status> button.
Press this button to open the [Review] screen. In this screen, you can
check a list of the status of copy and scan features whose settings have
changed from the defaults.
In text descriptions, this button is indicated as the <Review> button.
Pressing this button allows you to confirm the machine status and
meters, check the state of consumables, and print reports.
In text descriptions, this button is indicated as the <Machine Status>
button.
When this button is pressed, the UserID input screen is displayed for
System Administration mode or Login Setup/Auditron Administration.
In text descriptions, this button is indicated as the <Log In/Out> button.
If the machine is not operated for a while, the machine's power
consumption is lowered to enter the Power Saver mode. In the Power
Saver mode, this button lights up. To cancel the Power Saver mode,
press this button again.
In text descriptions, this button is indicated as the <Power Saver>
button.
Switches the power of the machine on/off.
Returns the statuses of all displayed services to their default values.
The machine will be reset to this state after it is turned on.
In text descriptions, this button is indicated as the <Clear All> button.
3
4
5
6
7
1
2
3
4
5
6
7
8
9
0
＃
C
18
17
16
15
Function
Control Panel
8
9
10
11
12
13
14
2
23
Advertisement
Table of Contents
