Xerox ApeosPort C6550 I Network Administrator's Manual page 120

12 Problem Solving
While Printing
12
118
When the [lpt (Spool)] is set to either [Hard Disk] or [Memory]
If the transmitted print data size exceeded the available amount of either hard disk
or memory, the print data will not be received.
Note • When the print data has exceeded the receivable size, some computers may immediately
re-transmit the print data. When this occurs, the computer appears to be halted. Deal with
this problem by canceling the print data transmission from the computer.
When the [lpd (Spool)] is set to [Off]
While the machine is receiving a print request from a computer, the machine cannot
accept any print requests from other computers.
When a computer's IP address or a name is changed
When a computer's IP address or a name is changed, queries and chancel
processes from the machine will not be performed correctly. Switch the machine off
and on when there is no print data in the receiving buffer.
Note • Canceling print jobs or forcing the machine to print the remaining jobs in the receiving buffer
can be operated from the control panel on the machine. For information about the operation,
refer to "Job Status" in Chapter 11 of the User Guide.