Usb - Xerox ApeosPort C6550 I Network Administrator's Manual

USB

This section describes the settings for the USB interface.
1
Start a web browser.
2
Enter the machine's IP address or the Internet address to the address entry column on
the web browser, and press the <Enter> key.
Example of the IP address entry
http://192.168.1.1
Example of the Internet address entry
http://xxx.yyyy.zz.vvv
Note
3
Click the [Properties] tab.
4
Click [+] on the left of [Port Settings] to display the items in the folder.
5
Click [USB].
6
Configure the following items.
Note
1) Set [Auto Eject Time].
2) Set the protocol using the [Adobe Communications Protocol] pull-down menu.
Note
7
Reflect the values as the machine's setting values.
1) Click the [Apply New Settings]. A screen to enter the user name and password will
be displayed.
2) Enter the System Administrator UserID and password into [User Name] and
[Password], and then click [OK].
Note
3) The right frame on the web browser will change to the machine reboot display.
4) Click [Reboot]. The machine will reboot and the setting value will be reflected.
Network Setting Items (Port/Protocol) for CentreWare Internet Services
• When specifying a port number, add ":" and a port number to the end of the Internet address.
• Click [Help] at the top right of the CentreWare Internet Services screen for details on the
setting items.
• Adobe Communication Protocol can be set only when an optional PostScript3 kit is
connected.
• The default UserID is "11111" and password is "x-admin".
9
59