Table of Contents
Advertisement
4
Select [Exit].
5
After the machine is restarted, print out [Settings List] to confirm that the EtherTalk
port is enabled.
For information how to print a setting list, refer to "Print Report/List" in Chapter 12 of the User Guide.
Configure other EtherTalk settings as necessary. Refer to "EtherTalk" (P.60) for EtherTalk
configuration.
Configuration on the Computer
The following describes the configuration procedure for the computer.
In order to print from the machine, the computer needs to have a print driver installed.
For information about the supported operating systems, refer to "Supported Operating Systems" (P.16).
Refer to the manual contained in the CD-ROM included in the PostScript3 kit.
Installation Procedure
51
8
Advertisement
Table of Contents
