Preparations; Installation Procedure - Xerox ApeosPort C6550 I Network Administrator's Manual

6 Installation When Using Microsoft Network (SMB)

Preparations

Installation Procedure

Installation Overview
Configuration on the Machine
6
1
2
42
Prepare the following items to use the machine when using a Microsoft Network (SMB).
TCP/IP or NetBEUI network environment
CentreWare Utilities CD-ROM (provided with the machine)
The machine can be connected to computers using Microsoft Networks (SMB).
Depending on the network environment, the machine may need to be configured with
an IP address, subnet mask and gateway address. Confirm with the network
administrator and set up the necessary items.
The following is the procedure to connect the machine to a Microsoft Network (SMB).
Configuration on the machine
Enabling the SMB port on the machine and configuring TCP/IP.
Configuration on the computer
Installing a print driver.
The following describes the configuration procedure to connect the machine to
Microsoft Networks (SMB). First enable the SMB port, then set the TCP/IP settings.
Note • The configuration can also be performed using CentreWare Internet Services or
CentreWare Utilities.
For information how to use CentreWare Internet Services, refer to "Using CentreWare Internet
Services" (P.53).
Display the [System Administrator Menu] screen.
1) Press the <Log In/Out> button.
2) Enter the UserID with the numeric keypad or a keyboard displayed by pressing
[Keyboard], and select [Confirm].
Note • The default UserID is "11111". When using the Authentication feature, a password is
required. The default password is "x-admin".
3) Select [System Settings].
Enable the SMB port.
1) Select [System Settings].
2) Select [Network Settings].
3) Select [Port Settings].
4) Select [SMB] and then select [Change Settings].
5) Select [Port Status] and then select [Change Settings].
6) Select [Enabled] then select [Save].
7) Select [Close] repeatedly until the [Network Settings] screen is displayed.