Xerox ApeosPort C6550 I Network Administrator's Manual page 115

Cause
The directory tree name is not
configured.
The context is not set.
Connected to a different printer
object.
The NetWare port on the
machine is not set to "Enable".
The file server is down.
There is another device on the
network with an identical device
name.
The NetWare port is not
functioning.
*:Refer to NetWare Online Documentation for configuration and operations.
When "Switch the machine off" is displayed
Cause
A NetWare problem occurred.
When the print output is not as you expected
Cause
The print language of the print
data and the print language
configured on the machine are
different.
Check point
Print out the [System Settings
List] to confirm if the tree name
is specified.
Print out the [System Settings
List] to confirm if the context is
specified.
Use NWADMIN from a computer
to confirm if the correct object is
assigned using the layout
information of the print server.*
Print out the [System Settings
List] to confirm if the NetWare
port is enabled.
Search for the file server using
the [Network Neighborhood].
Switch off the machine and use
NWADMIN from a computer to
confirm that the status of the
printer object is "Standby".
Print out [System Settings List]
to confirm if the network number
is left to "0000000" (NetWare
server is down) if using IPX/
SPX. If using TCP/IP, confirm if
the IP address is left to "0.0.0.0"
(static address unspecified, or
the DHCP server is down).
Check point
-
Check point
Confirm the print language on
the machine.
Remedy
Set the tree name.
Set the context.
Use the CentreWare Utilities
CD-ROM from a computer to
correctly set the file server
name/tree name/context/active
mode.
Use the CentreWare Internet
Services from a computer to
correctly set the file server
name/tree name/context/active
mode.
Enable the NetWare port.
Start the file server.
Use the CentreWare Utilities
CD-ROM from a computer to set
a different device name.
For the case of IPX/SPX, start
the NetWare server. For the
case of TCP/IP, either set a
static IP address or start the
DHCP server.
Remedy
Restart the machine.
Switch on the machine after the
display completely disappears.
Remedy
Match the print language of the
print data and the print language
configured on the machine.
NetWare
12
113