Xerox ApeosPort C6550 I Network Administrator's Manual page 27

Customizing of the Control Panel
You can customize the <Custom> buttons and items on the [All Services] screen.
Assigning a Feature to the Custom Buttons
By assigning a feature to the Custom buttons (<Copy>, <Custom 2>, and <Custom 3>),
you can switch to that feature without returning to the [All Services] screen.
The factory default settings for these buttons are, "Copy" for the 1st button, and none
for the 2nd and 3rd buttons. You can assign a feature to the buttons selected from the
features displayed on the [All Services] screen and [Language].
For information about how to assign a feature, refer to "Screen Defaults" in Chapter 10 of the User
Guide.
Attach the labels included in this product when you have changed the assignment. If
you have used a feature for which no label is provided, use a blank label and write down
the feature using a permanent marker and attach it to the appropriate Custom button.
Customizing the [All Services] Screen
You can customize the types of features and the location of buttons on the [All
Services] screen. The following shows the factory default settings.
For information about how to customize the screen, refer to "Screen Defaults" in Chapter 10 of the User
Guide.
Note
Copy
E-mail
Scan to Mailbox
Network Scanning
Scan to FTP/SMB
Check Mailbox
Stored Programming
Job Flow Sheet
Language
Setup Menu
Auto Gradation Adjustment
Print Mode
Changing the Feature Screen
You can customize the setting screen for the following features on the [All Services]
screen.
Copy
E-mail
Scan to Mailbox
Network Scanning
Scan to FTP/SMB
For information about how to change the settings, refer to "Basic Copying Tab" and "Basic Scanning
Tab" in Chapter 10 of the User Guide.
• When the feature is not available the button will not be displayed. Also, if the feature is
unavailable due to hardware problems, the button will be grayed out.
Control Panel
2
25