Table of Contents
Advertisement
Operation
7.2 Remote control
7.2 Remote control
The CuratOR LX490W is delivered with a remote control.
① Standby
② Escape
③ Up
④ Right
Key
Action
Menu L
•
Open the OSD menu
•
Navigate tab to the left
Menu R
•
Open the OSD menu
•
Navigate tab to the right
Escape
Exit OSD
Up
Navigate upwards in menu
Left
Close submenu
Right
Open submenu
Down
Navigate downwards in menu
Minus
Decrease value
Plus
Increase value
Standby
Switch the device to standby mode (this key must be held down for an
extended period to avoid inadvertently turning off the monitor when acci-
dentally pressing the standby button)
Source
Switch between connected signal sources
Zoom
Change the zoom ("One to One", "Fill all", "Fill to aspect ratio")
30
⑤ Down
⑨ Left
⑥ Plus
⑩ Menu L
⑦ Zoom
⑪ Source
⑧ Minus
⑫ Menu R
CuratOR LX490W
Instructions for Use, 06/2017
Advertisement
Table of Contents
