Table of Contents
Advertisement
●
Prepare the remote control
Insert batteries into the remote control. The remote control is used for operating and configuring this
monitor.
1.
On the back of the remote control, press the knob to unlock, and remove the
cover.
2.
Input AA batteries, and slide the cover back.
Attention
• Use the remote control within the range illustrated in the diagram below.
• When installing multiple monitors, leave sufficient space between each monitor so that only the intended
monitor will be operated by the remote control. Otherwise, all monitors that receive the remote control signal
will operate accordingly.
Note
• The monitor can be operated by a USB mouse (limited to menu operation) without using the remote control.
Connect the mouse to the USB downstream port at the back of the monitor.
8
5m
30°
30°
7m
5m
5m
20°
7m
20°
5m
Advertisement
Table of Contents
