●
Prepare the remote control
Insert batteries into the remote control. The remote control is used for operating and configuring this
monitor.
1.
On the back of the remote control, press the
knob to unlock, and remove the cover.
2.
Input AA batteries, and slide the cover back.
Attention
• Use the remote control within the range illustrated in
the diagram below.
• When installing multiple monitors, leave sufficient space between each monitor so that only the intended
monitor will be operated by the remote control. Otherwise, all monitors that receive the remote control signal
will operate accordingly.
Note
• When the remote control cannot be used, the monitor can be operated by a USB mouse (limited to menu
operation).
Connect the mouse to the USB downstream port at the back of the monitor.
5m
30°
30°
7m
5m
5m
20°
7m
20°
5m
9