Eizo CuratOR LX490W Instructions For Use Manual page 28

Commissioning
6.5 Adjustment of monitor and video source
Fast setting without measuring instrument
Precise adjustment is only possible with a measuring instrument.
If there is no measuring instrument available for fine adjustment, proceed as follows:
• Use the SMPTE test pattern.
• Adjust the brightness so that image sections with 5 % and 0 % gray value still visibly
contrast.
• Adjust the contrast so that image sections with 95 % and 100 % gray value still visibly
contrast. To adapt to the ambient lighting, adjust the backlight luminance.
CAUTION: the factory-set brightness is no longer maintained.
Automatically setting the video source
In order to automatically adjust the video source, it must support communication via the Dis-
play Data Channel (DDC), and the devices must be connected correctly. When switched on,
the monitor's EDID data (Extended Display Identification Data) is read out, and the video
source can detect the monitor.
CAUTION
Installation and parameterization of the video source
Please refer to the video source manufacturer's manual for detailed information about in-
stallation and configuration of the video source.
28
CuratOR LX490W
Instructions for Use, 06/2017