Connecting
5.5 Connecting the power cable
The monitor is supplied power via an appliance plug in the connection panel on the back of
the monitor.
Prerequisite
•
The monitor is installed in the ceiling suspension or wall mount unit, or on a stand.
•
The screws for attaching the cover to the connection panel are accessible.
See also
Connector locations [} 20]
Procedure
1. Using a suitable tool, remove the connection panel cover.
2. Connect the appliance plug to the monitor power socket.
3. The power cable can be secured using a cable grip.
4. Place the cover back on the connection panel.
24
and
Installing the monitor
[} 17].
CuratOR LX490W
Instructions for Use, 06/2017