Related Manuals for Eizo CuratOR LX491W
Summary of Contents for Eizo CuratOR LX491W
- Page 1 Instructions for Use Full HD 49" LCD Monitor Important Please read the safety information and all information delivered with the product carefully to familiarize yourself with safe and effective usage.
-
Page 2: Legal Information
Use of EIZO products WARNING EIZO products may only be used for the applications described in the catalog and in the relevant tech- nical documentation. If products and components from other manufacturers are used, these must be recommended or approved by EIZO. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. -
Page 3: Table Of Contents
Basic information on timing ............... 27 6.6.3 Entering timing data .................. 28 6.6.4 Determining the timing data .............. 29 7 Operation......................... 33 Operator controls .................... 33 Remote control ....................... 34 Lock or unlock OSD menu.................. 35 Picture layout (PaP, PiP, PoP) ................ 35 CuratOR LX491W Instructions for Use, 02/2018... - Page 4 13.2 Markings and symbols .................... 63 13.3 Warranty ......................... 64 13.4 Repairs ........................ 65 13.5 Environmental protection .................. 65 13.6 China RoHS (Restriction of Hazardous Substances) .......... 65 13.7 Additional devices.................... 66 13.8 Contact ........................ 67 13.9 Trademarks...................... 67 Index .......................... 68 CuratOR LX491W Instructions for Use, 02/2018...
-
Page 5: Introduction
1 Introduction 1.1 Contents of this document This document explains the functionality and the approved use of the CuratOR LX491W. To ensure clarity, it does not contain all detailed information on this product. The contents of this document are neither part of a previous or existing agreement, commit- ment or legal relationship, nor does it modify such. -
Page 6: Safety Information
2 Safety information 2.1 General safety instructions Correct and safe operation of EIZO devices assume professional transport, storage, installa- tion, and connection, as well as careful operation and service. The devices may only be used for applications for which they are intended. - Page 7 Only use power cables approved for China. These power cables are identified by the labels "CCC" or "CQC". Observe the country-specific regulations Observe all regulations of the country in which the device is used. CuratOR LX491W Instructions for Use, 02/2018...
- Page 8 If the device is brought into a room with a higher or rising temperature, condensed water will form in and on the device. Do not switch on the device until the condensed water has evaporated. Other- wise, the device could be damaged. CuratOR LX491W Instructions for Use, 02/2018...
- Page 9 Note that monitors can fail as a result of aging, and that image properties such as brightness, con- trast,and color value can change. Do not touch the monitor screen Due to mechanical pressure or electrostatic discharges, touching the screen can result in brief distur- bances to the image. CuratOR LX491W Instructions for Use, 02/2018...
-
Page 10: Product-Specific Safety Information
Note Image quality To maintain constant image quality, EIZO recommends cleaning the monitor on a regular basis and checking image properties in accordance with all applicable local regulations. CuratOR LX491W Instructions for Use, 02/2018... -
Page 11: Description
Note Keep the packaging material for subsequent transport of the device. Device The CuratOR LX491W is a Full HD 49" LCD Monitor. The monitor can be installed in a ceil- ing suspension, a wall mount, or a stand. Product Order number... -
Page 12: Monitor Performance Features
3.2 Monitor performance features 3.2 Monitor performance features The CuratOR LX491W has the following features that permit a wide range of applications: 49" large screen diagonal With a screen diagonal of 49" and a resolution of 1920 x 1080 pixels (2 MP), the LX491W is suitable for simultaneous use of several video sources. - Page 13 The monitor with protective screen is protected at the front against moisture (IP65 degree of protection). The space between the protective screen and the panel is sealed to prevent dust from en- tering, thus helping ensure the internal surfaces remain clean. CuratOR LX491W Instructions for Use, 02/2018...
-
Page 14: Setup And Installation
CAUTION Changes to device Do not make any mechanical or electric changes to the device. EIZO GmbH is not liable for changes made to the device. 4.1 Installation site NOTICE The power switch and connections must be accessible at all times When installing and connecting the monitor, ensure that the power switch and the connec- tions are accessible at all times. - Page 15 If the monitor is installed such that it can move, make sure that persons or objects in the facility are not endangered by the monitor's range of movement. Note During transport, use the original packaging or service packaging. CuratOR LX491W Instructions for Use, 02/2018...
-
Page 16: Installing The Monitor
The maximum torque for attaching to the holder is 10 Nm. • The screws used for attaching to the holder must meet the following requirements: Thread Strength 8.8 in accordance with ISO 898-1 Insertion depth 10 mm to 30 mm CuratOR LX491W Instructions for Use, 02/2018... -
Page 17: Connecting
CAUTION Changes to device Do not make any mechanical or electric changes to the device. EIZO GmbH is not liable for changes made to the device. CAUTION Shielding measures Follow all shielding measures in accordance with local EMC directives. If these guidelines are not observed, device malfunction may result. -
Page 18: Connector Locations
5.2 Connector locations The connectors are located in the connection panel behind a cover on the back of the moni- tor. The power switch is not covered and is freely accessible. Fig.: Rear view with cover CuratOR LX491W Instructions for Use, 02/2018... -
Page 19: Connection Panel
The connection panel is visible after removing the cover. The LX491W has connectors for power, communication, and video input and output signals. Composite 3G-SDI Power USB A USB B S-Video DVI-I DVI-D 5V/1A connector Fig.: LX491W connection panel CuratOR LX491W Instructions for Use, 02/2018... - Page 20 S video with Y/C signal (4-pin mini-DIN socket) • Composite (BNC) Additional connectors • Power connector (appliance plug) • USB: 2 downstream (type A) and 1 upstream (type B) connector. • Voltage supply: 5V/1A connector to supply external devices. CuratOR LX491W Instructions for Use, 02/2018...
-
Page 21: Connecting The Signal Cable
• When using a BNC to VGA adapter cable, the signal cables, for example, red, green, and blue, must be of the same length to prevent a loss in image quality. • Use only the cables specified by EIZO or the transmission links available from EIZO. Note Video source settings •... -
Page 22: Connecting The Power Cable
1. Using a suitable tool, remove the connection panel cover. 2. Connect the appliance plug to the monitor power socket. 3. The power cable can be secured using a cable grip. 4. Place the cover back on the connection panel. CuratOR LX491W Instructions for Use, 02/2018... -
Page 23: Commissioning
The monitor and video source can be switched on in any order. Switch on • Switch on the monitor. – The EIZO logo appears briefly. • Switch on the video source. – If there is no signal the monitor displays a black screen. -
Page 24: Check For Pixel Defects
• Digital signals on the DVI-I input do not require a fine adjustment of brightness and con- trast since the signal is always displayed in an optimal manner. With a fine adjustment, it is possible that gray scales are not displayed. CuratOR LX491W Instructions for Use, 02/2018... - Page 25 Please note that these settings have no impact on the calibration in the look up table: EIZO GmbH monitors are calibrated at the factory and maintain these settings: •...
-
Page 26: Adapting The Monitor Using Force Mode
Force Mode function. In many cases, a signal outside the standard range is displayed correctly without having to use Force Mode. This is possible because a large number of known timings are saved in the monitor. CuratOR LX491W Instructions for Use, 02/2018... -
Page 27: Basic Information On Timing
Field 1 consists of the lines 1 to 262 1/2, and field 2 of the lines 262 1/2 to 525. Only a few lines are displayed at the top and bottom of each field. Fig.: Interlaced scanning system Fig.: Non-interlaced scanning system CuratOR LX491W Instructions for Use, 02/2018... -
Page 28: Entering Timing Data
If you know or have already determined the timing data, you can enter it directly in the OSD "Force Mode" menu. Entering known timing data 1. Open a test pattern with a clearly defined border (e.g. SMPTE image). 2. Open the "Force Mode" menu is the OSD. CuratOR LX491W Instructions for Use, 02/2018... -
Page 29: Determining The Timing Data
1. Determine the start values using the auto function. 2. Enter the known data. 3. Optimize the scanning frequency. 4. Optimize the geometry and resolution. Step-by-step instructions for setting a timing can be found in the next sections. CuratOR LX491W Instructions for Use, 02/2018... - Page 30 In this case, "Total horizontal lines" has to be greater than "Horizontal Resolution". If "Total horizontal lines" is less than "Horizontal Resolution" during setting, that latter has to be reduced. A larger "Horizontal Resolution" can result in the image being split vertically. CuratOR LX491W Instructions for Use, 02/2018...
- Page 31 SMPTE image pixel-exact to the left inside edge of the gray/blue area. 3. Correct the values in the "Horizontal Resolution" input field until the right internal border of the gray/blue area is pixel-exact at the right edge of the SMPTE image. CuratOR LX491W Instructions for Use, 02/2018...
- Page 32 Note Only one timing can be saved in Force Mode itself. Note Once all settings in Force Mode have been performed, the zoom factor can be changed in the "Geometry" menu. CuratOR LX491W Instructions for Use, 02/2018...
-
Page 33: Operation
If the device is not working properly, check the system for basic connection and operating errors before contacting service personnel. 7.1 Operator controls The CuratOR LX491W has four keys for OSD operation located in the lower right corner. Key functions The keys have the following functions within the OSD menu: Function ①... -
Page 34: Remote Control
Operation 7.2 Remote control 7.2 Remote control The CuratOR LX491W is delivered with a remote control. ① Standby ⑤ Down ⑨ Left ② Escape ⑥ Plus ⑩ Menu L ③ Up ⑦ Zoom ⑪ Source ④ Right ⑧ Minus ⑫ Menu R... -
Page 35: Lock Or Unlock Osd Menu
The image from the primary video source is displayed in the larger segment in the lower section of the window. • The other images are displayed in a smaller format in the upper section of the window. CuratOR LX491W Instructions for Use, 02/2018... - Page 36 "PiP/PaP Window (2)". • The number displayed on the right side of the OSD window indicates which window is currently active for the setting ("1": main window, "2": secondary window) CuratOR LX491W Instructions for Use, 02/2018...
-
Page 37: Overview Of The Osd Menu
Note: The function is displayed only if the "Picture layout PaP, PiP, PoP" function is active within the Default: Main win- "Signal" menu. dow (1) The "Active adjustment window" establishes the win- dow for which the settings in this menu apply. CuratOR LX491W Instructions for Use, 02/2018... - Page 38 Note: "Hue" may only be set for S-Video or Compos- Default: 50 ite signals. Slider control Set the color saturation for RGB and video signals. Saturation Note: This menu is not displayed for the mono- Default: 50 chrome CVBS signal. CuratOR LX491W Instructions for Use, 02/2018...
-
Page 39: Image" Menu
Fill to aspect ratio: The picture is zoomed to the maximum screen area with reten- tion of the aspect ratio. • Fill screen: The picture is displayed to fill the complete screen (1920 x 1080 pixels). CuratOR LX491W Instructions for Use, 02/2018... - Page 40 Set the frequency and phase of the input signal Frequency Slider control Correct potential blur in the vertical lines by adjusting the "Frequency/Phase" setting. Note: Use a vertical line in a "Pixel On/Off" test pattern to make the adjustment. CuratOR LX491W Instructions for Use, 02/2018...
-
Page 41: Signal" Menu
The monitor does not search for available sources. The monitor screen appears black. An image is not displayed again unless a signal is applied to the set source or a dif- ferent signal source is selected manually. CuratOR LX491W Instructions for Use, 02/2018... - Page 42 Select whether the main or secondary window serves as the synchronization window. PiP/PaP window (2) Note: The "Synchronization Window" menu is Default: Main window (1) only available when the "Picture in Picture (PiP)" setting is active. CuratOR LX491W Instructions for Use, 02/2018...
- Page 43 Color / Monochrome Color Switch signal between monochrome and color Monochrome If "Color" is set, a monochrome signal is dis- YPbPr/YCbCr played green. For correct gray scale represen- Default: Color tation, select the "Monochrome" setting. CuratOR LX491W Instructions for Use, 02/2018...
- Page 44 Note: The higher the slider setting, the longer it will take for a desired timing change to occur (delayed by a number of milliseconds). CuratOR LX491W Instructions for Use, 02/2018...
-
Page 45: Lut" Menu
LUT" OSD menu. See also "Adjust LUT" menu [} 50]. A table with information regarding the avail- able LUTs is displayed below the LUT selec- tion. Note: Select a DICOM LUT to view radio- graphic images. CuratOR LX491W Instructions for Use, 02/2018... -
Page 46: Info" Menu
BL on over 350 cd/m² [h] • Source • Mode • Source signal • 2nd Source • Mode • 2nd Source signal • FW type • FW version • OSD version • Config version • SDK version CuratOR LX491W Instructions for Use, 02/2018... -
Page 47: Utilities" Menu
Top - right / Mid - left / screen area using predefined positions Centered / Mid - right / Bottom - left / Bottom - center / Bottom - right Default: Bottom - right CuratOR LX491W Instructions for Use, 02/2018... - Page 48 The source scan is interrupted as soon as the quence first source with an active video signal is found. This signal is then displayed. Reset operations Reset to firmware de- All user settings are deleted and reset to the faults... firmware defaults. CuratOR LX491W Instructions for Use, 02/2018...
-
Page 49: Force Mode" Menu
When "Start" is selected, the start values for the timing are determined using "Execute function...". See also Determining the timing data When "Start" is selected in Mode, the set video reso- Execute function... lution is executed. CuratOR LX491W Instructions for Use, 02/2018... -
Page 50: Adjust Lut" Menu
Lmax can be changed. All other functions are hid- • den. • DICOM • Gamma 2.0, 2.2, 2.5, 2.7, 3.0, 3.3 • Log.Lum.linear Default: DICOM Lmin 0 - 250 Adapt the minimum black value between 0 and 5 cd/ Default: 40 (0.8 cd/m CuratOR LX491W Instructions for Use, 02/2018... - Page 51 When using the color setting based on the existing defaults, it is also possible to individually modify the color coordinates. The Y color coordinate can be adapted using the "Y" function. Current target value (display only) CuratOR LX491W Instructions for Use, 02/2018...
-
Page 52: Cleaning And Maintenance
Fairy Ultra, Pril, Palmolive washing-up liquid Pyridine derivatives Activ spray, undiluted Water Tap water Distilled water CAUTION • Information on cleaning or disinfection of other system components can be obtained from the respective instructions for use. CuratOR LX491W Instructions for Use, 02/2018... -
Page 53: Maintenance
SMPTE image: The gray levels must be displayed correctly and visibly at both 5% and 95%. • VeriLum image: The visible display of small squares in all gray scale levels confirms the correct calibration. CuratOR LX491W Instructions for Use, 02/2018... -
Page 54: Troubleshooting
USER settings can be changed. • Has the device been running for at least 20 minutes without Power Management acti- vated? Other Loose plug Connect the loose plug and secure it. Defective cable Replace the defective cable. CuratOR LX491W Instructions for Use, 02/2018... -
Page 55: Technical Specifications
Miniature fuse 2 T6.3 AH: UL 248-14, 250 V (5 x 20 mm) Maximum current consumption 1.5 - 0.7 A Power consumption 85 W (typical), 144 W (max) Power consumption in Standby Mode 19 W CuratOR LX491W Instructions for Use, 02/2018... -
Page 56: Electronics
• Front: IP65 EN 60529 • Back: IP20 Connection panel On rear panel, under cover Weight in kg 31 kg +/- 10% Dimensions (W x H x D) in mm 1103 x 634 x 80.9 CuratOR LX491W Instructions for Use, 02/2018... -
Page 57: Climatic Conditions
CAN/CSA - C 22.2 60601-1:08 (Third Edition) • GB 4943.1 (non-tropical, altitude < 2000 m) Protection class Protection class I Degree of protection according to Front: IP65 EN 60529 Back: IP20 Medical product classification Class I according to 93/42/EEC, Appendix IX CuratOR LX491W Instructions for Use, 02/2018... -
Page 58: Dimension Drawings
Dimension drawings 11.1 View from front and side 11 Dimension drawings All dimensions in mm 11.1 View from front and side 11.2 Rear view CuratOR LX491W Instructions for Use, 02/2018... -
Page 59: Spare Parts / Accessories
Spare parts / accessories 12.1 Accessories 12 Spare parts / accessories 12.1 Accessories Accessories Order number Description FST4700 Black 6GF69888BA03 Stand, black FST4700 White 6GF69888BA04 Stand, white CuratOR LX491W Instructions for Use, 02/2018... -
Page 60: Appendix
Information and manufacturer’s declaration – electromagnetic radiation The CuratOR LX491W is intended for use in the electromagnetic environments noted below. The customer or user of the CuratOR LX491W has to ensure that the device is used in such an envi- ronment. - Page 61 Information and manufacturer’s declaration – electromagnetic radiation The CuratOR LX491W is intended for use in the electromagnetic environments noted below. The customer or user of the CuratOR LX491W has to ensure that the device is used in such an envi- ronment.
- Page 62 Information and manufacturer’s declaration – electromagnetic radiation The CuratOR LX491W is intended for use in the electromagnetic environments noted below. The customer or user of the CuratOR LX491W has to ensure that the device is used in such an envi- ronment.
-
Page 63: Markings And Symbols
Recommended minimum distance between portable and mobile RF communications devices and the CuratOR LX491W The CuratOR LX491W is intended for use in an electromagnetic environment in which interference due to electromagnetic radiation is controlled. The customer or user of the monitor can help prevent electromagnetic interference by maintaining the recommended minimum distance between portable and mobile RF communications devices (transmitter) and the monitor as shown below. -
Page 64: Warranty
For warranty details, please contact the sales partner from whom you purchased the product. These warranty conditions are neither extended nor lim- ited by the contents of this instruction manual. CuratOR LX491W Instructions for Use, 02/2018... -
Page 65: Repairs
The device is in compliance with directive 2011/65/EU for limiting the use of specific haz- ardous materials in electric and electronic devices. 13.6 China RoHS (Restriction of Hazardous Substances) 液晶显示器 LCD Monitor 型号 Model: CuratOR LX491W 根据SJ/T11364-2014《电子电气产品有害物质限制使用标识要求》特提供如下有关污染控制 方面的信息。 The following product pollution control information is provided according to SJ/T11364-2014 Marking for the restriction of the use of hazardous substances in electrical and electronic product. -
Page 66: Additional Devices
(economically or technically) available substitutes. 产品中有毒有害物质或元素的名称及含量 Table of hazardous substances’ name and con- centration. 13.7 Additional devices Connected devices such as PCs must meet the relevant safety standards. CuratOR LX491W Instructions for Use, 02/2018... -
Page 67: Contact
13.9 Trademarks The EIZO Logo is a registered trademark of EIZO Corporation in Japan and other countries. EIZO is a registered trademark of EIZO Corporation in Japan and other countries. RadiForce is a registered trademark of EIZO Corporation in Japan and other countries. -
Page 68: Index
Technical specifications 55 Timing Image Sticking 23 Basic information 27 Input 20 determining 29 Installation site 14 Troubleshooting 54 Line power 22 User 5 45 Adjust 50 Warranty 64 Maintenance 53 Monitor information 46 CuratOR LX491W Instructions for Use, 02/2018... - Page 70 Siemensallee 84 76187 Karlsruhe Germany Instructions for Use, 02/2018 CuratOR LX491W 1084978-001 Copyright © 2018 EIZO GmbH. All rights reserved.