Remote Control - Eizo DuraVision FCF2304W-IP User Manual

2-2. Remote Control

1.
2.
3.
4. /
5. Number Buttons ( to
/
6. /
7. / / / ,
8.
9.
10.
11.
12.
13. /
Attention
• Use the remote control within the range illustrated in
the diagram below.
• When installing multiple monitors, leave sufficient space between each monitor so that only the intended monitor will be
operated by the remote control. Otherwise, all monitors that receive the remote control signal will operate accordingly.
1
3
9
10
12
Switches input signals for display.
Turns the power on or off.
Used to display/exit the monitor's Adjustment menu.
Adjusts the brightness of the monitor screen.
)
Used to enter numbers and letters.
Adjusts the network camera display magnification.
Used to set and control (pan/tilt) network cameras, and configure system settings of
the monitor.
Returns to the previous menu status in menu operation.
Changes the monitor screen layout.
Each time the button is pressed, the layout changes in the following order: 1 Screen
→ 4 Screens → 9 Screens → 16 Screens → 8 Screens → 1 Screen.
Displays/hides the menu of the live image screen.
Turns Smart Functions on or off.
Turns the sequential display of camera images on or off.
Changes over the page of camera images to display on the monitor.
2
4
5
6
7
8
11
13
5m
30°
30°
7m
5m
Chapter 2 Controls and Functions
5m
20°
7m
20°
5m
11