Setting The Remote Control Id; Setting The Product Id; Remote Controller - Eizo DuraVision FDF2711W-IP Installation Manual

3-13. Setting the Remote Control ID

This function is for use with models equipped with a remote control.
When using multiple units of this product, the product operated by a remote control can be limited by
specifying the ID shared by the product and remote control.
Note
• When the remote control ID is "0" it will operate even if the product ID and remote control ID does not match.
• The factory value of the remote control is "0".
●

Setting the product ID

1.
Select "Remote Controller" of "System".
The "Remote Controller" screen is displayed.
2.
Set the following items.
Item
ID
Display ID
3.
Select "Apply".
The settings are complete.
Detail
Select the number that will be the ID.
When set to "On", the ID is displayed in the upper right
of the Live Image Screen when the ID button of the
remote control is pushed.
Setting range
0 to 99
On / Off
Chapter 3 System Settings
33