Operation; Operator Controls - Eizo CuratOR LX490W Instructions For Use Manual

7 Operation

This section describes the operator controls and functions of the monitor OSD menu.
CAUTION
Settings in the OSD menu
Changes to the OSD menu settings can impact the image properties. For this reason,
OSD menu settings should only be changed by trained personnel.
Measures in the event of a failure
Note
Device malfunction in operation
If the device is not working properly, check the system for basic connection and operating
errors before contacting service personnel.

7.1 Operator controls

The CuratOR LX490W has four keys for OSD operation located in the lower right corner.
Key functions
The keys have the following functions within the OSD menu:
Key Function
① •
•
② •
•
③ •
•
④ •
Power switch •
CuratOR LX490W
Instructions for Use, 06/2017
Open OSD menu
Toggle
Navigate between the submenu / tabs
Decrease/change value
Navigate between the submenu / tabs
Increase/change value
Exit OSD or submenu (settings are retained)
Switch the device on and off
Operation
7.1 Operator controls
29