Remote Control - Eizo CuratOR LX491W Instructions For Use Manual

Operation

7.2 Remote control

7.2 Remote control
The CuratOR LX491W is delivered with a remote control.
① Standby
② Escape
③ Up
④ Right
Key Action
Menu L • Open the OSD menu
• Navigate tab to the left
Menu R • Open the OSD menu
• Navigate tab to the right
Escape Exit OSD
Up Navigate upwards in menu
Left Close submenu
Right Open submenu
Down Navigate downwards in menu
Minus Decrease value
Plus Increase value
Standby Switch the device to standby mode (this key must be held down for an
extended period to avoid inadvertently turning off the monitor when acci-
dentally pressing the standby button)
Source Switch between connected signal sources
Zoom Change the zoom ("One to One", "Fill all", "Fill to aspect ratio")
34
⑤ Down ⑨ Left
⑥ Plus ⑩ Menu L
⑦ Zoom ⑪ Source
⑧ Minus ⑫ Menu R
CuratOR LX491W
Instructions for Use, 02/2018