Signal" Menu - Eizo CuratOR LX490W Instructions For Use Manual

7.8 "Signal" menu

Function
Active adjustment
window
Source selection
Source scan
CuratOR LX490W
Instructions for Use, 06/2017
Values
Main window (1)
PiP/PaP window (2)
Default: Main window (1)
VGA / DVI Analog /
DVI Digital / HDMI /
FBAS / SVHS / SDI /
Analog monochrome to
FBAS
Enabled / Disabled
Default: Enabled
Description
Selecting the active adjustment window
Note: The function is displayed only if the "Pic-
ture layout PaP, PiP, PoP" function is
active.
The "Active adjustment window" establishes
the window for which the settings in this menu
apply.
Select source for main display
Selection of picture source for full format im-
age.
Note: This function is only displayed when the
"Source scan" function is set to "Disabled".
Activate / deactivate automatic source scan
• Enabled: If the displayed source is no
longer available, the monitor searches au-
tomatically for the next available source.
• Disabled: If the displayed source is no
longer available, no image is displayed: the
monitor screen appears black.
An image is not displayed again unless a
signal is applied to the set source or a dif-
ferent signal source is selected manually.
Note: If no signal is available, the monitor does
not search for other available sources.
Operation
7.8 "Signal" menu
37