Nortel SONET AccessNode Manual page 123

Procedure 4-6 (continued)
Assigning new connections
Step
43
44
45
46
47
48
49
Action
Using the arrow keys, move to the Assign as TR-08 command, then press
Space (or Keypad 0).
The Assign as TR-08 dialog appears.
Note that the cursor is at the System Number field.
Use the Assign as TR-08 dialog when a DS1 is being assigned to TR-08
service. You must specify the system number and link id values in the Assign
as TR-08 dialog to complete the assignment.
To specify a system number (host ID), use Ctrl_L (or Keypad 3) to display the
List menu at the System Number field.
From the List menu use the arrow keys and move to the system number you
need.
Select the system number you want from the List menu by pressing Space
(or Keypad 0).
The System Number field as well as the Link ID field are automatically filled
in when the selection is complete. If you made an incorrect selection, an
Attention dialog appears requesting that you make a valid selection.
If you
want to change the suggested Link ID
do NOT want change the Link ID
Tab to the Link ID field, then display the Chooser menu by pressing Space
(or Keypad 3).
Note: Only TR-08 links (A, B, C, and D) that are not yet selected are
displayed.
Move to the Link ID you want, then press Space (or Keypad 0).
The first link provisioned in a system must be the A-link. The A-link carries the
derived data link (DDL) format. Subsequent links can be B, C, or D.
Select the OK button if you want to initiate the assignment of the TR-08
service for the selected DS1.
The assignment of the DS1 in the Facilities list in the main window is changed
to the TR-08 system number (1 to 7) and the link number (A, B, C, or D).
Note: The Assignment column on the Manage Facility Assignments window
shows the TR-08 selection you have just made.
—continued—
AccessNode Site Testing Procedures 323-3001-221 Issue 2.0
Preparing for system integration 4-27
Then
go to step 47
go to step 49