Nortel SONET AccessNode Manual page 118

4-22 Preparing for system integration
Procedure 4-6 (continued)
Assigning new connections
Step
5
6
7
8
9
10
AccessNode Vol 3B 323-3001-221 Issue 2.0
Action
Select an End NE A from the list by pressing Space (or Keypad 0).
Tab to the End NE Z: field. Display the Chooser menu by pressing Ctrl_ L /
(or Keypad 3).
The Chooser menu. shows the facilities that are provisioned for the end NE
Z pair.
Select an End NE Z from the list by pressing Space (or Keypad 0).
The NE you selected appears in the End NE Z: field.
Tab to the STS-1 channel field. Display the chooser menu by pressing
Ctrl_L / (or Keypad 3).
The Chooser menu. shows the facilities that are provisioned for the STS-1
channel.
Select the STS-1 channel from the list by pressing Space (or Keypad 0).
The selected STS-1 channel appears in the STS-1 channel field. A list
appears under the section titled, Complete VT-Managed STS-1 Channel.
Tab to the Route field and use the arrow keys to select Short or Long. Use
Ctrl_A (or Keypad 0) to select it.
If you want to
return to the Connection Manager
Window
display the Manage Facility
Assignment window
—continued—
Then do the following
tab to the Done Return button and
select it by pressing Ctrl_L (or
Keypad 0)
tab to and select Facility Assign-
ments from the lower right corner of
the Manage VT Connections
window. Continue with step 11.