Nortel SONET AccessNode Manual page 120

4-24 Preparing for system integration
Procedure 4-6 (continued)
Assigning new connections
Step
16
17
Assigning the DS1 as GR-303 DMS
18
19
20
21
22
23
24
25
AccessNode Vol 3B 323-3001-221 Issue 2.0
Action
Move to the Assign as Tandem command, then press Space (or Keypad 0).
The Assignment column shows Tandem for the selected Facility.
If you want to
make another assignment
exit from the tool
From the Manage Facility Assignments screen, you can change the End NE
A or End NE Z fields.
a. Tab to the End NE A field and display the Chooser menu by pressing
Ctrl_L / (or Keypad 3).
b. Select an available NE from the Chooser menu by pressing Space (or
Keypad 0).
c. Repeat the same procedure to change the End NE Z field.
The NE A Tributary and NE Z Tributary list appear. Note the different
assignments under the Assignment column.
Using the arrow keys move the cursor to an unassigned or assigned facility
you want to assign as GR-303 DMS.
Select the List item menu using Ctrl-L (or Keypad 2).
The List item menu appears.
Using the arrow keys, move to the Assign as GR-303 DMS command, then
press Space (or Keypad 0).
The Assign as GR-303 DMS dialog appears. The cursor is on the IG Number
field.
The Assign as GR-303 DMS dialog allows you to assign a DS1-TIC VT to a
specific RDTLink number of a GR-303 DMS.
To specify a GR-303 DMS IG number (host ID). Press Ctrl_L / (or Keypad 3)
to display the Chooser menu.
From the Chooser menu use the arrow keys to move to the IG number you
need.
Press Space (or Keypad 0) to select the IG number.
The fields in the dialog are automatically filled in.
Select the OK button to return to the Manage Facility Assignments screen.
A warning dialog appears.
—continued—
Then
return to step 12
go to step 60