Nortel SONET AccessNode Manual page 121

Procedure 4-6 (continued)
Assigning new connections
Step
26
27
28
Assigning the DS1 with GR-303 MVI
29
30
31
32
33
Action
Select the OK button from this dialog to continue.
The Manage Facility Assignments window appears.
Note that the Assignment column on the Manage Facility Assignments
window reflects the GR-303 DMS selection you have just made.
If you now want to
make another assignment
exit from the tool
From the Manage Facility Assignments screen, you can change the End NE
A or End NE Z fields.
a. Tab to the End NE A field and display the Chooser menu by pressing
Ctrl_L / (or Keypad 3).
b. Select an available NE from the Chooser menu by pressing Space (or
Keypad 0).
c. Repeat the same procedure to change the End NE Z field.
The NE A Tributary and NE Z Tributary list appears. Note the different
assignments under the Assignment column.
Using the arrow keys move the cursor to an unassigned or assigned facility
you want to assign as GR-303 MVI.
Select the List item menu by pressing Ctrl_L (or Keypad 2).
The List item menu appears.
Using the arrow keys, move to the Assign as GR-303 MVI command, then
press Space (or Keypad 0).
The Assign as GR-303 MVI dialog appears.
Note that the cursor is on the IG Number field. The Assign as GR-303 MVI
dialog allows you to assign a DS1-TIC VT to a specific RDTLink number of a
GR-303 MVI host.
To specify a GR-303 MVI IG number (host ID), press Ctrl_L / (or Keypad 3)
to display the Chooser menu at the IG Number field.
—continued—
AccessNode Site Testing Procedures 323-3001-221 Issue 2.0
Preparing for system integration 4-25
Then
return to step 12
go to step 60