Nortel SONET AccessNode Manual page 117

Procedure 4-6 (continued)
Assigning new connections
Action
Step
1
2
3
4
Action
Open the Connection Manager tool located under the Network Admin toolset
from the User Session Manager window.
If you do not know how to do this, see OPC User Interface Description ,
323-3001-301, in Operations, Administration, and Provisioning , Volume 4A.
The main window of the Connection Manager tool appears. The cursor is set
on the first line of the Connection ID field.
Note 1: If you are opening the Connection Manager for the first time and you
have set up no STS connections, the table in the screen below is empty.
If the connection is
VT-managed
STS-managed
Tab to the Manage VT connections in the lower right corner of the Connection
Manager window, then press Ctrl_A (or Keypad 0).
The Manage VT Connections window appears showing the configuration.
The cursor is located at the End NE A: field.
The Manage VT Connections window allows you to set up a new VT
connection, or to view or change existing ones. This window shows the
configuration name, the two end network elements, the channel and the
route.
After you fill in the required fields, a list of VT connections associated with the
specified VT-managed path appears.
If you want to
change the Configuration field
continue with the End NE A: field
More than one configuration must be set up by moving the cursor to the
Configuration field. Press Ctrl_L / (or Keypad 3) to display the Chooser
menu.
The cursor is set at the End NE A: field.
Display the Chooser menu by pressing Ctrl_L / (or Keypad 3).
The facilities that are provisioned for the end NE A pair are shown in the
Chooser menu.
—continued—
AccessNode Site Testing Procedures 323-3001-221 Issue 2.0
Preparing for system integration 4-21
Then
go to step 2
go to step 11
Then
go to step 3
go to step 4