Date/Timer/Energy Saver - Kyocera PA4500ci Operation Manual

System Menu > Date/Timer/Energy Saver

Date/Timer/Energy Saver

[System Menu / Counter] key > [Date/Timer/Energy Saver]
Configures settings related to the date and time.
Item
[Date/Time]
[Date Format]
[Time Zone]
[Auto Panel Reset]
[Panel Reset Timer]
Set the date and time for the location where you use the machine. If you
perform Send as Email, the date and time set here will be displayed on
the header.
Value: [Year] (2000 to 2035), [Month] (1 to 12), [Day] (1 to 31), [Hour] (0
to 23), [Minute] (0 to59), [Second] (0 to 59)
➡
Setting Date and Time (page 54)
NOTE
If you change the date/time while using the trial version of an application,
you will no longer be able to use the application.
Select the display format of year, month, and date. The year is displayed
in Western notation.
Value: [Month/Day/Year], [Day/Month/Year], [Year/Month/Day]
Set the time difference from GMT. Choose the nearest listed location
from the list.
If you select a region that utilizes summer time, configure settings for
summer time.
➡
Setting Date and Time (page 54)
If no jobs are run for a certain period of time, automatically reset
settings and return to the default setting. Select to use Auto Panel Reset
or not.
Value: [Off], [On]
NOTE
For setting the time until the panel is automatically reset, refer to the
following:
➡
Panel Reset Timer (page 266)
If you select On for Auto Panel Reset, you can set the amount of time to
wait before Auto Panel Reset after Operation.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Panel Reset] is set to [On].
266
Description