Table of Contents
Advertisement
Troubleshooting > Adjustment/Maintenance
4
Enter the appropriate value.
1
Find the location on each chart where 2 lines most closely match. If this is the 0 position, registration for
that color is not required. For the illustration, B is the appropriate value.
From charts H-L and H-R, read the values from HL and HR.
From chart V, read the values from V.
2
Select [Registration].
3
Select the chart to be corrected.
4
Select [+] or [-] to enter values read from the chart.
Select [+] to advance the value from 0 to 9. Select [-] to go in the opposite direction.
When [-] is selected, the value changes from 0 to alphabetic letters, going from A to I. Select [+] to go in
the opposite direction.
It is not possible to enter values with the numeric keypad.
5
Repeat steps 3 and 4 to enter the registration values for each chart.
6
Select [Start] after all content has been entered. Color registration begins.
7
Select [OK] after color registration is complete.
Performing Color Registration Procedure (Detailed Registration)
1
Load paper.
384
Advertisement
Table of Contents
Troubleshooting
