Kyocera PA4500ci Operation Manual page 374

Troubleshooting > Troubleshooting
NOTE
If Auto Error Clear is set to [On], the process will resume automatically after a set period of time. For details, refer
to the following:
➡
Auto Error Clear (page 268)
"Performing Calibration..." is displayed
The machine is in adjustment mode to maintain its quality. Please wait.
"Cannot connect to Authentication Server." is displayed
Does the machine time match the server's time?
• Set the machine time to match the server's time
➡
Setting Date and Time (page 54)
Is it properly registered with the authentication server?
• Enable User Login Administration.
➡
Enable User Login Administration (page 273)
• Set the network authentication server.
- Check the connection status with the server.
- Confirm that the computer name and password for the authentication server are correct.
Is the machine connected to the network correctly?
➡
Connecting LAN Cable (page 38)
➡
Network Setup (page 55)
NOTE
If Auto Error Clear is set to [On], the process will resume automatically after a set period of time. For details, refer
to the following:
➡
Auto Error Clear (page 268)
366