Kyocera PA4500ci Operation Manual page 256

System Menu > System/Network
[HTTPS]
Item
[Protocol Settings]
[Available Network]
[IPP]
Item
[Protocol Settings]
[Available Network]
[IPP over TLS]
Item
[Protocol Settings]
[Available Network]
[RAW Port]
Item
[Protocol Settings]
[Available Network]
Select whether to communicate using HTTPS.
Value: [Off], [On]
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Set whether to send documents using IPP. To use this, select [On] for
this setting, and select [Off] for [TLS] in the [Security Settings]. Then
select [Not Secure (IPPS & IPP)] in the security settings from Command
Center RX. The default port number is 631.
Value: [Off], [On], 1 to 32767 (Port Number)
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Sets whether to receive documents using TLS-protected IPP. To use this,
select [On] in these settings, and select [On] for [TLS] in the [Security
Settings]. The default port number is 443.
Value: [Off], [On], 1 to 32767 (Port Number)
NOTE
If the setting is [On], a TLS certificate is required. The factory certificate is
the certificate owned by the machine.
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Set whether to receive documents using the Raw Port.
Value: [Off], [On]
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
248
Description
*1*2
Description
Settings
*1*2
Description
*1