Kyocera PA4500ci Operation Manual page 65

Installing and Setting up the Machine > Default Settings of the Machine
Configuring the Wireless Network
When the optional Wireless Network Interface Kit (IB-37, IB-38, or IB-51) is installed on the machine and the
connection settings are configured, it is possible to print in a wireless network (wireless LAN) environment.
➡
IB-37/IB-38 <Wireless network interface (USB: 5GHz/2.4GHz)> (page 403)
➡
IB-51 <Wireless network interface (KUIO: 2.4GHz)> (page 403)
The configuration methods are as follows:
Configuration Method
Configuring the Connection from
the Operation Panel on This
Machine
Setting the Connection by Using
the Wi-Fi Setup Tool
Setting the Connection by Using
the Setup Utility of IB-51
Configuring Connections on the
Web Page
NOTE
When you want to switch to the network interface other than Wired (default) after installing an optional Network
Interface Kit (IB-50) and a Wireless Network Interface Kit (IB-37/IB-38/IB-51), select the desired setting on [Primary
Network (Client)].
➡
Primary Network (Client) (page 257)
Use Wi-Fi Settings or Wireless Network to configure the network in
details from System menu.
➡
[Wi-Fi Settings] (page 236)
➡
[Setup] (page 254)
This is a tool that can be downloaded from Download Center
(https://kyocera.info/). You can configure the connection according to
the instructions provided by the wizard.
➡
Wired Connection with LAN Cable Using Wi-Fi Setup Tool (page 58)
This is the setup tool included in the CD of IB-51. You can use it on both
Windows and Mac OS.
➡
IB-51 Operation Guide
For the IB-37/IB-38, the connection can be set on the Command Center
RX.
➡
Command Center RX User Guide
For the IB-51, the connection can be set on the dedicated Web page.
➡
IB-51 Operation Guide
57
Description