Kyocera PA4500ci Operation Manual page 381

Troubleshooting > Troubleshooting
"The device cannot be connected because allowed connections
would be exceeded." is displayed
Are you connecting more than the maximum number of Wi-Fi Direct connections?
Disconnect the devices that you are not using, or set the [Auto Disconnect] of this unit to disconnect the devices.
➡
[Wi-Fi Direct Settings] (page 235)
"The password does not meet password policy." is displayed
Has your password expired?
Change the login password. The job is canceled. Select [End].
➡
Password Policy Settings (page 275)
Have your password policy requirements changed (password length, strings of characters to use,
etc.)?
Check your password policy requirements and change the login password.
The job is canceled. Select [End].
➡
Password Policy Settings (page 275)
"Launching has been canceled because it may be a malicious
program." is displayed
Execution was aborted due to a possible malware program.
The names of applications for which malware has been detected are displayed.
Please contact the administrator.
"RAM disk error." is displayed
A RAM disk error has occurred.
The job is canceled. Select [End].
The following error code is possible:
04: There is not enough free space on the RAM disk. If the optional RAM disk is installed, increase the RAM disk
size by using [RAM Disk Setting] in the System Menu.
➡
RAM Disk Setting (page 260)
373