Kyocera PA4500ci Operation Manual page 257

System Menu > System/Network
[ThinPrint]
Item
[Protocol Settings]
[ThinPrint over TLS]
[Available Network]
[Enhanced WSD]
Item
[Protocol Settings]
[Available Network]
[Enhanced WSD over TLS]
Item
[Protocol Settings]
[Available Network]
Set whether to use ThinPrint. To use, select [On] in these settings. The
default port number is 4000.
Value: [Off], [On], [1] to [32767] (Port Number)
NOTE
This feature does not appear if the optional ThinPrint Option is not
running.
To use ThinPrint over TLS, select [On] for this setting, and for [TLS] in the
[Security Settings], select [On].
Value: [Off], [On]
NOTE
If the setting is [On], a TLS certificate is required. The factory certificate is
the certificate owned by the machine.
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Set whether to use our proprietary web services.
Value: [Off], [On]
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Set whether to use our proprietary Web service on TLS.
Value: [Off], [On]
Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
249
Settings
*1*2
Description
*1
Description
*1*2