Kyocera PA4500ci Operation Manual page 248

System Menu > System/Network
IMPORTANT
• When setting the Auto-IP, enter "0.0.0.0" in IP Address.
• After changing the setting, restart the network or turn the machine OFF and then ON.
[IPv6 Settings]
Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/IP] is [On].
Item
[IPv6]
[Manual Settings]
[RA (Stateless)]
Select whether to use IPv6.
Value: [Off], [On]
NOTE
Selecting [On] displays IP address in [IP Address (Link Local)/Prefix
Length] after restarting the network.
Manually specify the IP address, prefix length, and gateway address of
TCP/IP (IPv6).
Value
[IP Address (Manual)]
128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
[Prefix Length]
0 to 128
[Default Gateway]
128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
NOTE
• This function is displayed when [IPv6] is set to [On].
• To enter [Default Gateway], set [RA (Stateless)] to [Off].
Select whether to use RA (Stateless).
Value: [Off], [On]
NOTE
• This function is displayed when [IPv6] is set to [On].
• Selecting [On] displays IP address in [IP Address (Stateless)/Prefix
Length] after restarting the network.
240
Description