Server Settings - Kyocera PA4500ci Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
[Prompt for name and validate]
A screen for entering the user name and password will be displayed when attempting a printing. The
user name and password stored in the "Login user names list" needs to be entered. The user name
and password must be entered each time a printing is attempted.
[Validate user name (computer) or prompt for login user name]
When printing, the Windows user name is searched in the "Login user names" and printing is
possible if the name is registered. If the name is not registered, the printing will be canceled for
users with only user authority. If the user has administrator privileges, the screen to enter the user
name and password will appear.
3 Click [OK].
NOTE
For other settings of job accounting, refer to the following:
➡
Printer Driver User Guide

Server Settings

Set the server type when network authentication is enabled.
1
Display the screen.
1 [System Menu / Counter] key > [User Login/Job Accounting]
NOTE
If the user authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login user name or password, please contact your administrator.
2 Select "User Login Settings" [User Login] > [Network Authentication].
2
Configure the settings.
1 Select [NTLM], [Kerberos] or [Ext.] as the [Server Type] and select [OK].
When [NTLM] or [Kerberos] is selected, you can configure multiple authentication servers.
2 Enter the [Default Host Name] (64 characters or less) for the Authentication Server, and select the [OK]
key.
When selecting [Ext.] as the server type, enter the port number.
3 Select [Default Domain] and enter the domain name for the Authentication Server, and select [End].
If domain name is not set, enter a domain name. Select the number and then select [Menu]. Select [Edit]
and enter a domain name. Select [OK], [Close], [End] to register the Default Domain Name.
281