Connecting Monitors For Using The Nvidia Rtx A5000 Graphics Card - Siemens SIMATIC IPC RW-545A Operating Instructions Manual

Procedure
1. Connect the monitors to the rear of the device (Page 20).
For information on connecting monitors with adapters, see "Hardware accessories
(Page 32)".
2. On delivery the device is set for multi-monitoring.
If the delivery state settings have been changed, configure the multi-monitoring function
in the firmware settings, see "Installing a graphics card (Page 102)".
See also
Technical specifications of graphic (Page 152)
Technical specifications of the connections on the device (Page 155)
4.4.3.4

Connecting monitors for using the NVIDIA RTX A5000 graphics card

Power supply unit
The NVIDIA RTX A5000 graphics card can be operated with the following power supply unit:
• Power supply unit 850 W
Connection sockets on the rear of the device
You will find four connection sockets on the rear of the device for connecting monitors at the
integrated graphics interfaces.
• 3 x DP (DisplayPort; labeling on the device: DPP1, DPP2, DPP3)
• DVI-D (labeling on the device: X70)
You will find 4 additional connection sockets on the rear of the device for connecting
monitors to the optional NVIDIA RTX A5000 graphics card.
• 4 x DisplayPort
You can find information on the connection sockets on the rear of the device under: "Device
ports (Page 20)".
You can find information on the adapters under "Hardware accessories (Page 32)".
Workstation SIMATIC IPC RW-545A
Operating Instructions, 08/2023, A5E52943278-AA
Connecting the device
4.4 Connecting I/O devices
69