9.9
Technical specifications of the connections
9.9.1
Technical specifications of the connections on the device
See the note in "Applicability of technical specifications (Page 141)".
Note
Detailed information on the position of the connections is available in "Device ports
(Page 20)".
Connectio
Description
n socket
COM1
COM:
COM2
•
Serial interface (standard: RS-232)
•
Sub-D socket
•
V.24
DP
DisplayPort (labeling on the device: DPP)
An analog monitor can be used with an adapter cable (optional).
•
Connection for monitors with DisplayPort connector
•
Connection for monitors with VGA connector via DP-VGA adapter,
See Hardware accessories (Page 32)
•
Connection for monitors with DVI connector via DP-DVI-D adapter,
See Hardware accessories (Page 32)
DVI-D
DVI-D:
•
Connection for monitors with DVI-D connector
Monitors with a DVI-D connector can also be connected to the DPP
connection socket using an adapter.
USB Type A USB Type A:
•
High-current
USB Type C
USB Type C:
•
High-current
Workstation SIMATIC IPC RW-545A
Operating Instructions, 08/2023, A5E52943278-AA
Technical specifications
9.9 Technical specifications of the connections
Assignment
9-pin
(±12 V)
20-pin
(3.3 V; 500 mA)
24-pin
(5 V; 500 mA)
5 V
5 V; 1.5 A; up to 10 Gbps
155