Siemens SIMATIC IPC RW-545A Operating Instructions Manual page 101

4. Screw the two hexagon bolts ① with two of the enclosed screws into the first and third drill
holes of the retainer.
5. Hold the retainer from the inside with the hexagon bolts on the rear panel of the device and
fasten the retainer from the outside with the remaining screws on the rear panel of the
device. You can find information on the position of the drill holes in section "Rear of the
device (Page 19)".
6. Slide the bar of the retainer ③ onto the USB stick.
7. Fix the retainer by turning the screw ② on the guide rail.
8. Close the device.
Workstation SIMATIC IPC RW-545A
Operating Instructions, 08/2023, A5E52943278-AA
Expanding and assigning parameters to the device
7.4 Connecting a USB stick to the internal interface
101