Table of Contents
Advertisement
Installation in the control cabinet
When mounting the device in a cabinet, use a central and easily accessible mains
disconnector (if possible, near the device).
Horizontal: Mounting on device base
This installation type meets the requirements in accordance with IEC60297-3-100.
Vertical: Mounting on device base
For vertical operation, mount the device on a horizontal base made of metal and secure it
against falling.
The following are available from Rittal device bases
de/product/list.action?categoryPath=/PG0001/) for this purpose (Rittal Type TE 7000.620,
Rittal Type VR 5501.655, Rittal Type DK 5501.655). You should also observe the information
of the manufacturer of the device bases.
Vertical: with tower kit
For the vertical operation of the device with a tower kit, the device has a cover and feet. The
tower kit can be ordered as an option, see "Hardware accessories (Page 32)".
More information
More information can be found in the Quick Installation Guide (QIG) that is enclosed with the
device.
3.2.2
Securing the device
Dangerous voltage and fire hazard
Improper actions during installation and assembly may lead to personal injury and/or
damage to equipment.
It is essential that you follow the installation and mounting instructions under:
• Safety instructions for assembly (Page 42)
• Safety instructions on ambient and environmental conditions (Page 44)
Workstation SIMATIC IPC RW-545A
Operating Instructions, 08/2023, A5E52943278-AA
WARNING
Unpacking and installing the device
3.2 Mounting the device
(https://www.rittal.com/de-
55
Advertisement
Table of Contents
